What should I do before I put my robot in water?

FAQ & Guideline
1
  1. Make sure the battery is sufficently charged (battery indicator lights up green).
    For X11,
  • if more than 5 LED beads of battery indicator light up, the default program is to clean walls first, then the floor;
  • if fewer than 5 LED beads light up, the default program is to clean the floor only.

  1. Open the top cover, insert a clean filter basket in the robot.

  2. Decide how you’d like to retrieve the robot. Two options are currently offered:

  • with the floating rope: attach the rope to the middle of the handle on the top cover, then you can retrieve the robot and lift it out of water through the floating ring at the rope end;

  • with the hook (preferred): the assesories provide one plastic hook, two screws and two cap nuts. You need to prepare a standard pool pole, and fix the hook to the pole using a screw and a nut. When the cleaning job is done, you can retrieve the robot with the hook.

  1. Make sure to tighten the Charging Port seal cap to keep water out.